Panasonic Lumix DMC-TZ100 Operating Instructions Manual

Also see for DMC-TZ100: Creating still pictures guide Basic operating instructions Operating instructions

356SQW0550Connecting with other devicesStoring recorded still pictures and motion pictures on your PC■ For PTP modeThe camera can be connected to your computer even if [USB Mode] (→82) is set to[PictBridge(PTP)].• Data can be read only from the card in the PC.• It may not be possible to import if there are 1,000 or more pictures on the card.• Motion pictures cannot be played back in the PTP mode.■ Copying to your computer without using “PHOTOfunSTUDIO”You can save pictures to use on your computer by dragging and dropping folders andfiles into separate folders on your computer.• The card of this unit contains the following files (folder structure).*2●WindowsDrive (“LUMIX”) isdisplayed in [Computer].●MacDrive (“LUMIX”) isdisplayed on the desktop.DCIM (Still/motion pictures)100_PANA (Up to 999 pictures/folder)Folder numberP1000001.JPG*1File numberP1000999.JPG101_PANA999_PANAMISC (DPOF files, Favourite)PRIVATEAVCHD (Motion pictures in AVCHD)TZ100/TZ101 Colour Space P: sRGB_: AdobeRGBCard*1 .JPG: Still pictures.RW2: Still pictures recorded in RAW file.MP4: [MP4] Motion Pictures*2 New folders are created in the following cases:• When there is a picture with file number 999 inside the folder.• When using cards already containing the same folder number (for example, pictures taken withother cameras, etc.).• When recording after performing [No.Reset]. (→85)●Before inserting or removing a card, turn the camera off and disconnect the USB connectioncable. Otherwise, data may be destroyed.● Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional).●When the battery begins to run out during communication, a warning beep sounds. Remove theUSB connection cable safely. Otherwise, data may be destroyed.● Before connecting or disconnecting the AC adaptor (optional), turn the camera off.