Panasonic Lumix DMC-TZ100 Operating Instructions Manual

Also see for DMC-TZ100: Creating still pictures guide Basic operating instructions Operating instructions

205SQW0550Shutter and Drive SettingsBurst function●When the burst speed is set to [H] and if many burst pictures are taken, the burst speed may bereduced while burst pictures are being taken.●When the burst speed is set to [SH] or [H] ([AFS/AFF/AFC] in [Rec] menu is set to [AFS] or thefocus mode is set to [MF]), and the exposure and White Balance are fixed to those of the firstpicture.When the burst speed is set to [H] ([AFS/AFF/AFC] in [Rec] menu is set to [AFF] or [AFC]), [M], or[L], and the exposure and White Balance are adjusted individually for each still picture.● Burst speed may be reduced if shutter speed (pictures/sec.) is reduced in darker locations.●With repeated recordings, it may take a while between recordings, depending on the usageconditions.●It may take a while to store still pictures that were taken using the burst function. If youcontinue to record while storing, the number of burst pictures that can be taken will bereduced. A high-speed card is recommended when recording using the burst function.●This function is not available in the following cases:• [Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft Image of a Flower](Scene Guide Mode)• [Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter],[Sunshine] (Creative Control Mode)• When using [Time Lapse Shot]• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]• When recording using [Post Focus]• During motion picture recording• When recording using the flash• TZ100/TZ101 During T (Time) recording• TZ100/TZ101 When [Multi Exp.] is set●[SH] in Burst Mode cannot be used In the following cases:• When [Quality] is set to [ ], [ ] or [ ]• When using [Stop Motion Animation]