376SQW0550OthersMessage displays■ Battery[This battery cannot be used]• Use a genuine Panasonic battery. Consult the dealer or your nearest Service Centre if display stillremains.• Wipe any dirt away from the battery terminal.■ Wi-Fi function[Failed to connect wireless access point] / [Connection failed] / [No destination found]• Check following regarding the wireless access point.– The wireless access point information set on this unit is wrong. Check the authentication type,encryption type, and encryption key. (→339)– Power of the wireless access point is not turned on.– Setting of the wireless access point is not supported by this unit.• Check the network setting of the destination.• Radio waves from other devices may block the connection to a wireless access point. Check otherdevices that are connected to the wireless access point and devices that use the 2.4 GHz band.[No picture to send]• This is displayed when there is no image to transmit due to the restriction of the destination.Check the file type of the image to transmit. (→319)[Connection failed. Please retry in a few minutes.] / [Network disconnected. Transfer stopped.]• Radio waves from the wireless access point are getting weak. Perform the connection closer to thewireless access point.• There is no reply from the server or it has exceeded the communication processing time. Try againafter a while.• Depending on the wireless access point, connection may be automatically disconnected afterspecific time has passed. Reconnect the connection again.[Upload to the Cloud Folder is available after Cloud Sync settings have been set up ondownloadable devices such as PCs or smartphones.]• Devices that download images from a cloud folder are not registered.• Perform Cloud Sync setting. Configure the settings on a PC with “PHOTOfunSTUDIO” (→353) oron a smartphone with “Image App”. For details on [Cloud Sync. Service], refer to (→331).