Panasonic M2X Series Instruction Manual

Panasonic M2X Series Instruction Manual Manual pdf 13 page image

- 13 -Inverter and applicable peripheral equipmentWiring apparatus selection(1) Selection of no-fuse breaker, magnetic contactor, thermal relay, and wiringNo-fuse breaker MagneticcontactorThermalrelay ∗1 Wiring (mm2) ∗2Inverter No.Applicablemotor(kW) (Rated current)Matsushita Electric Works(Contact configuration)Matsushita Electric Works(Current adjustment range)Matsushita Electric WorksInput(for powersupply)Output(for motor)ControlcircuitＭ２Ｘ０４４＊＊＊０.４ＢＢＣ３５Ｎ（５Ａ）ＢＭＦＴ６１０４４Ｎ（３Ｐ＋１ａ）ＢＭＦ９０３Ｅ（１.４ - ２.２Ａ）２.０(AWG14)２.０(AWG14)０.７５(AWG18)Ｍ２Ｘ０８４＊＊＊０.７５ＢＢＣ３５Ｎ（５Ａ）ＢＭＦＴ６１０４４Ｎ（３Ｐ＋１ａ）ＢＭＦ９０４Ｅ（１.７ - ２.６Ａ）２.０(AWG14)２.０(AWG14)０.７５(AWG18)Ｍ２Ｘ１５４＊＊＊１.５ＢＢＣ３１０Ｎ（１０Ａ）ＢＭＦＴ６１０４４Ｎ（３Ｐ＋１ａ）ＢＭＦ９０７Ｅ（２.８ - ４.２Ａ）２.０(AWG14)２.０(AWG14)０.７５(AWG18)Ｍ２Ｘ２２４＊＊＊２.２ＢＢＣ３１５Ｎ（１５Ａ）ＢＭＦＴ６１０４４Ｎ（３Ｐ＋１ａ）ＢＭＦ９１１Ｅ（４.０ - ６.０Ａ）２.０(AWG14)２.０(AWG14)０.７５(AWG18)Ｍ２Ｘ３７４＊＊＊３.７ＢＢＣ３２０Ｎ（２０Ａ）ＢＭＦＴ６１０４４Ｎ（３Ｐ＋１ａ）ＢＭＦ９１５Ｅ（５．０ - ８.０Ａ）２.０(AWG14)２.０(AWG14)０.７５(AWG18)Ｍ２Ｘ５５４＊＊＊５.５ＢＢＣ３２０Ｎ（２０Ａ）ＢＭＦＴ６１０４４Ｎ（３Ｐ＋１ａ）ＢＭＦ９２７Ｅ（９.０ - １３.０Ａ）３.５(AWG12)２.０(AWG14)０.７５(AWG18)Ｍ２Ｘ７５４＊＊＊７.５ＢＢＣ３３０Ｎ（３０Ａ）ＢＭＦＴ６１０４４Ｎ（３Ｐ＋１ａ）ＢＭＦ９３７Ｅ（１２ - １８Ａ）３.５(AWG12)３.５(AWG12)０.７５(AWG18)The cables connected to the ground terminal must be the same size as the powersupply cable and the motor cable, respectively.(2) Relay selectionFor relays used in control circuits such as the control input terminal, you should use asmall signal relay (min. guaranteed current of 1mA or less) in order to prevent poorcontact.＜Examples＞ Matsushita Electric Works: DS type, NK type, HC typeOmron: G2A type(3) Control circuit switch selectionIf using a switch instead of a relay, use a switch for extremely small current in order toprevent poor contact.＜Example＞ Nihon Kaiheiki: M-2012J-G∗1 To use the inverter for parallel operation, select the thermal relay according to the motor used.∗2 The above motor cable sizes apply to the case where the distance between the motor and the inverter is20 m or less. If the distance between the motor and the inverter exceeds 20 m, select a cable size ofthe next higher rank.