Panasonic M2X Series Instruction Manual

Panasonic M2X Series Instruction Manual Manual pdf 21 page image

- 21 -Parameter SettingSettingOperation Panel* Normally in the monitor mode, the operation panel displays frequency (Hz).* The indicated value is just for reference. Do not use this device as a measuring instrument.Also, the operation panel can display the magnification factor specified by [ Display scalefactor].5-digit LED Displays an output frequency, set frequency, value magnified by the scale factor,cause of error and parameter value.2-digit LED Display a parameter number. In the monitor mode, the direction of motor rotationis displayed.MODE switchUsed to change the monitor mode. Pressing this switch changes the monitor asfollows:Output frequency Converter voltage Motor currentUsed to switch between the parameter No. mode and the parameter value mode,and to register a parameter value.DATA SET switch●Description on each mode△ ▽ switch Use to select, set and modify a parameter.Can be held down for continuous changing.RUN switch Issues the run command.STOP switch Issues the stop command.r/minHzＡＶＳＴＯＰＤＡＴＡＳＥＴＲＵＮＭＯＤＥ^^5-digit LED2-digit LED*PanasonicPanasonicPanasonicPanasonicMonitor mode Displays an output frequency, converter voltage and motor current.At power-ON, the operation panel is set to this mode.If the MODE switch is pressed in the parameter No. mode orparameter value mode, the display will be changed to this mode.Parameter No.modeA parameter number ( - )) blinks. If the DATA SET switchis pressed in the monitor mode, the display will be changed to thismode.Parametervalue modeA parameter set value blinks. The set value can be changed withthe △ or ▽ button.Pressing the DATA SET switch after changing a set valueregisters the updated value. Even if the MODE switch ispressed, the data will not be registered.