Panasonic M2X Series Instruction Manual

Panasonic M2X Series Instruction Manual Manual pdf 39 page image

- -39Parameter DescriptionParameter settingNo. Parameter name Adjustment range Min. unit Factory setting Check ∗1Set frequency (0th speed) 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz1st speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 50Hz2nd speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 30Hz3rd speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 15Hz4th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz5th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz6th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz7th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz8th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz9th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz10th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz11th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz12th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz13th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz14th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0Hz15th speed frequency 0, 0.5∗2 - Upper limit frequency 0.01Hz∗3 0HzRun command selection Operation panelTerminal blockBothRS485 communicationFrequency commandselectionOperation panelControl dial- 0 - 5V(4-20mA)- 0 - 10V(4-20mA)Operation modeselection 2, 4, 8, 16 speed operation mode 4 speedoperation mode0 - 100 2 400W -1.5kW 40Torque controlAutomatic boostSlip frequency vector control 2.2kW -7.5kW 20Jogging frequency 0, 0.5∗2 ～30Hz 0.01Hz 7Hz∗1 Parameters marked by in the Check column are tripped for safety if modified ormemorized.Cancel the trip before use.∗2 The lower limit of the adjustment range varies depending on the [ Starting frequency] setting.∗3 When the set value exceeds 160 Hz, the minimum unit of setting is 0.05 Hz.