Panasonic NV-DS15EN/A Operating Instructions Manual

Setting the Date and TimeIf you set [CLOCK SET] on the [OTHER FUNCTIONS] Sub-Menu to [YES], the menu shown above appears.For example: To set the clock to 15th October2000,14:30.1 Turn the [PUSH] Dial to set to [2000].The years change In the following order:2000—>2001 —>...—*2089—*2000—*...2 Press the [PUSH] Dial to select [MONTH], thenturn it to set to [10].3 Press the [PUSH] Dial to select [DAY], then turnit to set to [15].4 Press the [PUSH] Dial to select [HOUR], thentum it to set to [14].5 Press the [PUSH] Dial to select [MIN.], then turnit to set to [30].6 Press the [MENU] Button to finish the date andtime setting.The operation of the clock starts from [00] seconds.Pressing the button one more time makes the menudisappear.•As the time of the Movie Camera’s built-in clock is subject toa slight imprecision, be sure to check the time beforerecording. If the flashing [§*] Indication appears, charge thebuilt-in battery and set the date and time again.•The dock employs the 24-hour system.Charging the Built-in Lithium BatteryThe built-in battery maintains the operation of the clock. Whenthe [@£] Indication appears, the buiit-in lithium battery isdischarged.H Connect the AC Adaptor to the Movie Camerawith the power turned off and then connect tothe AC mains socket. 16)After charging for 4 hours, the built-in lithium battery canpower the clock for approximately 3 months.