Edit mode49VQT1L41Printing pictures by directlyconnecting to the printer (PictBridge)To print pictures by directly connecting the moviecamera to the printer, use a printer compatiblewith PictBridge. (Read the operating instructionsfor the printer.)≥Insert a card and set to Card Playback Mode.1 Connect the movie camera and the printerwith the supplied USB cable.1 USB cable≥The [PictBridge] indication appears on thescreen of the movie camera.(When the printer is being recognised, the[PictBridge] indication blinks.)≥When no card is inserted in the movie camera,the [PictBridge] indication does not appear.(You cannot print any pictures.)≥When the movie camera and the printer are notconnected properly, the [PictBridge] indicationkeeps blinking. (It will blink for overapprox.1 minute.) Connect the cable or checkthe printer.≥When images are displayed in multi-screen,they cannot be printed.≥Do not use any other USB connection cablesexcept the supplied one. (Operation is notguaranteed with any other USB connectioncables.)2 Select [SINGLE PRINT] or [DPOF PRINT].≥If there is no file with a DPOF setting, youcannot select [DPOF PRINT].≥When you select [DPOF PRINT] for printing,set the number of prints in DPOF setting.≥When [DPOF PRINT] is selected, print afteryou determine the paper size. (Step 6)≥When [DPOF PRINT] is selected,dateprinting is unavailable.3 Move the joystick left and right to select adesired picture, and then press it.4 Select the desired number of prints.≥You can set up to 9 prints.5 Select the setting for date printing.≥If the printer is not capable of date printing,this setting is unavailable.6 Select [PAPER SIZE].[STANDARD]: Size specific to the printer[4a5 INCH][5a7 INCH][4a6 INCH][A4]≥You cannot set paper sizes not supported onthe printer.7 Select [PAGE LAYOUT].[STANDARD]: Layout set on the printer[ ] : No frame[ ] : With frame≥You cannot set a layout not supported on theprinter.8 Set [PRINT] >> [YES] to start printing.1PictBridge
