Panasonic NVGS330 Operating Instructions Manual

Also see for NV-GS330: Operating instructions

Contents

Others74VQT1L41Card1: Recorded pictures are not clear.• Have you set [BASIC] >> [PICT.QUALITY] >>[ ]? If recording is done with it set to [ ],pictures with fine details may include a mosaic-like pattern. Set [PICT.QUALITY] >> [ ]. (-28-)2: A file recorded on a card cannot be deleted.• Is the file protected? Protected files cannot bedeleted. (-45-)• For the SD Card, if its write protect switch is setto [LOCK], then deletion is disabled. (-16-)3: Photoshot playback images do not looknormal.• The picture may be damaged. In order toprevent the loss of image data, backing up on acassette or a personal computer isrecommended.4: Even if a card is formatted, it cannot beused.• Either the movie camera or the card may bedamaged. Please consult a dealer. Use an SDCard from 8 MB to 4 GB with this unit.5: During playback, [UNPLAYABLE CARD] isdisplayed.• The image was either recorded in a differentformat, or data is damaged.6: If the SD card is inserted in another device,it is not recognised.• Check that the device is compatible with thecapacity or type of SD card (SD Memory Card/SDHC Memory Card) that you inserted. (-16-)Refer to the operating instructions of the devicefor details.Others1: The indication disappears, the screen isfrozen, or no operation can be performed.• Turn off the power to the movie camera. If thepower cannot be turned off, press the [RESET]button, or detach the battery or AC adaptor andthen reattach it. After that, turn on the poweragain. If normal operation is still not restored,detach the power connected, and consult thedealer who you purchased the movie camerafrom.2: “PUSH THE RESET SWITCH” is displayed.• An irregularity in the movie camera has beenautomatically detected. Remove the cassetteor the card for data protection and then pressthe [RESET] button with the boss A. Themovie camera will be activated.• If you do not press the [RESET] button, thepower to the movie camera is turned offautomatically about 1 minute later.• Even after you press the [RESET] button, theindication may still appear repeatedly. If so, themovie camera needs repair. Detach the powerconnected, and consult the dealer who youpurchased the movie camera from. Do notattempt to repair the appliance by yourself.ARESET