Others69VQT1L41≥For images not recorded with this unit, thenumber of horizontal and vertical pixels maydiffer so the image size is not displayed.Warning/alarm indicationsIf any one of the following indications lights up orflashes, please check the movie camera.Confirmatory indicationsY: A cassette with the accidental erasureprevention slider placed in the [SAVE]position is inserted.No cassette is inserted.[--]/0:The built-in battery is low. -13-°: The warning/alarm indication appears whenyou record yourself. Turn the LCD monitortowards the viewfinder and check thewarning/alarm indication.: No card is inserted.REMOTE :An incorrect remote control mode has beenselected. -23-2END:The tape came to the end during recording.:: The video heads are dirty. -76-Textual indications3DEW DETECT/3EJECT TAPE:Condensation has occurred. Take out thecassette and wait for a while. It takes sometime until the cassette holder opens, but thisis not a malfunction. -75-LOW BATTERY:The battery is low. Recharge it. -9-NO TAPE:No tape is inserted. -15-TAPE END:The tape came to the end during recording.CHECK REC TAB:You are attempting to record pictures on atape with the accidental erasure preventionslider placed in the [SAVE] position.You are attempting audio dubbing or digitaldubbing on a tape with the accidentalerasure prevention slider placed in the[SAVE] position.CHECK REMOTE MODE:An incorrect remote control mode has beenselected. This is only displayed at the firstoperation of the remote control afterpowering-on. -23-WRONG TAPE FORMAT:You are attempting to play back a tapesection that has been recorded with adifferent TV system. This cassette isincompatible.UNPLAYABLE CARD:You are attempting to play back data notcompatible with this movie camera.CLOSE CASSETTE DOOR:The cassette cover is open. Close thecassette cover. -15-UNABLE TO A.DUB (LP RECORDED):Audio dubbing cannot be performedbecause the original recording was in LPmode.UNABLE TO A.DUB:You are attempting to perform audiodubbing on a non-recorded tape.CANNOT RECORD IN AGS MODE:The AGS function is activated. -33-COPY PROTECTED:Images cannot be recorded correctlybecause the medium is protected by a copyguard.CARD ERROR:This card is not compatible with this moviecamera.You are attempting to format a failed card.It displays, when you attempt to insert theincompatible card to Card Slot.NO CARD:No card is inserted.CARD FULL:Card does not have sufficient memoryremaining.Select Card Playback Mode and deleteunnecessary files.NO DATA:There are not any recorded files on thecard.FILE LOCKED:You are attempting to erase protected files.CARD LOCKED:The write protection switch on the SD Cardis set to [LOCK].NEED HEAD CLEANING:The video heads are dirty. -76-PUSH THE RESET SWITCH:An irregularity in the equipment has beendetected. Press the [RESET] button (-74-).This may solve the problem.CHANGE MODE TO USE USB:The USB cable is connected to the moviecamera in Card Recording Mode.DISCONNECT USB CABLE:You are attempting to turn the mode dial inPC Connection Mode with the USB cableconnected to the movie camera. You areattempting to record pictures on a tape/card