Panasonic PT-AE100E Operating Instructions Manual

Also see for PT-AE100E: Service manual

L|AUDIO|RAUDIOVIDEO INPC INVIDEO S2 VIDEOL|AUDIO|RYPB /CBPR /CRCOMPONENT INENGLISH-19 Preparation18-E NGLISHExample of connecting to video equipmentDVD playerVideo deckNOTE:B Only one audio system circuit is available for the AUDIO L-R input jacksfor S-VIDEO/VIDEO signals, so if you wish to change the audio inputsource, you will need to remove and insert the appropriate plugs.B If the signal cables are disconnected or if the power supply for thecomputer or video deck is turned off while the digital zoom or indexwindow functions are being used, these functions will be cancelled.NOTE:B It is better to shut down the computer before turning off the MAIN POWERswitch of the projector.B Refer to the list of compatible signals on page 49 for the types of RGBsignals which can be input to the projector by connecting a computer.Example of connecting to computerConnectionsNotes on connectionsB Read the instruction manual for each system component carefully beforeconnecting it.B Turn off the power supply for all components before making anyconnections.B If the cables necessary for connecting a component to the system are notincluded with the component or available as an option, you may need tofashion a cable to suit the component concerned.L|AUDIO|RAUDIOVIDEO INPC INVIDEO S2 VIDEOL|AUDIO|RYPB /CBPR /CRCOMPONENT INComputerTo video outputTo audiooutputTo audiooutputTo S-Video outputTo RGB outputTo audio output