Panasonic PT-AE100E Operating Instructions Manual

Also see for PT-AE100E: Service manual

ENGLISH-27 Basic Operation26-E NGLISHReturning a setting tothe factory defaultIf you press the NORMAL button onthe remote control unit, you canreturn settings to the factory defaultsettings. However, the operation ofthis function varies depending onwhich screen is being displayed.B When a menu screen is beingdisplayedAll items displayed will be returnedto their factory default settings, andthe bar scale will appear white.B When an individual adjustmentscreen is being displayedOnly the item displayed will bereturned to the factory defaultsetting, and the bar scale willappear white.NOTE:B Triangle symbols above andbelow a menu bar indicate thefactory default setting. Itemswhich do not have these trianglesymbols cannot be returned tothe factory default setting.Indicates the standard factorydefault settingIndicates the current adjustmentvalueB The positions of triangle symbolsvary depending on the type ofsignal being input.Using the freeze functionThe picture will alternate between a still picture and a moving picture eachtime the F(function) button on the remote control unit is pressed.Still picture Moving pictureMenu operation guide# Press the MENU button.The MAIN MENU screen will bedisplayed.$ Press the FF or GG arrowbuttons to select an item.Selected items will be displayedin blue.% Press the ENTER button toaccept the selection.The selected menu screen oradjustment screen will then bedisplayed.(Example: PICTURE menu)M E N UK E Y S T O N EP I C T U R EP O S I T I O NS H U T T E RL A N G U A G EO P T I O NS E L C T E N T E RM E N UK E Y S T O N EP I C T U R EP O S I T I O NS H U T T E RL A N G U A G EO P T I O NS E L C T E N T E RP I C T U R EP I C T U R E M O D E N O R M A LC O L O R 0T I N T 0B R I G H T 0C O N T R A S T 0S H A R P N E S S 0C O L O R T E M P . N O R M A LT V - S Y S T E M A U T O 1S E L C T A D J E S C& Press the FF or GG buttons toselect an item, and then pressthe II or HH buttons to changeor adjust the setting.An individual adjustment screensuch as the one shown below willbe displayed for bar-scale items.The bar scale will turn greenwhen any adjustment changesthe setting from the factory setvalue.Unavailable on-screenmenu itemsThis projector has unadjustableitems and unusable functionsdepending on the signal being input.When an item cannot be adjusted ora function cannot be used, thecorresponding on-screen menudisplay does not appear, and theitem or function will not work even ifthe ENTER button is pressed.Returning to theprevious screenIf you press the MENU button whilea menu screen is being displayed,the display will return to theprevious screen.If you press the MENU button whilethe MAIN MENU screen is beingdisplayed, the MAIN MENU screenwill be cleared.B R I G H T 0Select FREEZE from the FUNCTION item in the OPTION menu to use thisfunction. (Refer to page 38.)P I C T U R EP I C T U R E M O D E N O R M A LC O L O R 0T I N T 0B R I G H T 0C O N T R A S T 0S H A R P N E S S 0C O L O R T E M P . N O R M A LT V - S Y S T E M A U T O 1S E L C T A D J E S CB R I G H T 0