Panasonic PT-AE2000E Operating Instructions Manual

Also see for PT-AE2000E: Spec file Brochure & specs Service manual Service manual

Contents

Basic OperationRemote control operationENGLISH - 27Q Saving a log setting as a profileReturn to the COLOUR MANAGEMENT menuand save the stored log as a profile. Make surethat the PICTURE MODE is not switched.1. Select the PROFILE SAVE menu and pressENTERThe PROFILE SAVE menu is displayed. You cansave the profile as USER1, USER2 and USER3.2. Press ENTER to save the profileThe confirmation screen is displayed. Press ENTERagain to save.3. Use F G I H to specify the location of therequired character to enter and press the ENTERbutton.You can enter up to 14 characters.4. Repeat step 3 until you finish the text line.Move cursor to ALL DELETE and press the ENTERbutton to delete all the entered text line.Press the DEFAULT button to delete the last enteredcharacter or indicated with cursor in the text box.To insert a character in the entered text line, movethe cursor to the text box to select the required placeand press G then perform step 4.5. Select OK and press the ENTER button to set theentered text as a name.Press the ENTER button without entering any text tokeep the default name.Q Deleting the saved profilesYou can delete the profiles from PROFILEDELETE menu.1. Select PROFILE DELETE and press the ENTERbutton.2. Select the required profile or ALL DELETE andpress the ENTER button.The confirmation screen will be displayed and selectOK.3. Press the ENTER button.Q Changing the profile namesYou can change the name of the profiles from thePROFILE NAME CHANGE menu.1. Select PROFILE NAME CHANGE and press theENTER button.2. Select the required profile and press the ENTERbutton.3. Use F G I H to specify the location of therequired character to enter and press the ENTERbutton.4. Select OK and press the ENTER button to set theentered text as a name.Q Loading saved profilesWhen profiles are loaded under the PICTUREMODE setting, you can keep them as you defineduntil the PROFILE is set to NORMAL.1. Select the required PICTURE MODE and pressENTER.2. Press the COLOR MANAGEMENT button andselect the PROFILE menu.The profile settings of the selected PICTURE MODEwill be displayed.3. Select the required profile and press ENTER.USER3USER2USER1OK CANCELALL DELETEPROFILE NAME INPUTNORMAL Return to the default setting of thePICTURE MODE menu.USER1Defined profile settings.USER2USER3NOTE:• LOG and PROFILE SAVE are not displayed beforeyou apply COLOUR MANAGEMENT.• If you load a profile with a different attribute mode ofthe profile, the CURSOR and PROFILE SAVEmenus will not be displayed.• The approximate colours will be adjusted at thesame time. If you adjust the exact same colourdifferently, both colours will affect each other and youmight get unexpected results.• White, Black and Grey are not adjustable.• If you escape the COLOUR MANAGEMENT menuor attempt to perform another menu action beforeyou save the adjusted profile, the confirmationscreen will be displayed.• If you switch the input signal before you save theprofile, the setting will be cancelled without notice.