Panasonic PT-AE2000E Operating Instructions Manual

Also see for PT-AE2000E: Spec file Brochure & specs Service manual Service manual

Contents

ENGLISH - 39 SettingsLENS CONTROLYou can use the 2 different test patterns to adjust thefocus and zoom of the image. See “Lens shift andpositioning” on page 16.1. Press ENTER to display test pattern 1.Press F G to adjust the focus and I H to adjustthe zoom.2. Press ENTER to display test pattern 2.Press F G to adjust the focus and I H to adjustthe zoom.3. Press ENTER to display the projected image.You can confirm the adjustment is fit to the projectedimage.4. Press MENU or RETURN to return to the previousmenu, or press repeatedly to escape the menumode.ZOOM/FOCUSNOTE:• When the projector and/or the screen is tilted, adjustthe focus at the centre of the image. The upper andlower edge might be out of focus.• When the image is distorted in keystone, adjust theKEYSTONE in POSITION menu.Remote control Control panelSee “Navigating through the MENU” on page 30.See “Main menu and sub-menu” on page 28.RETURN FOCUSZOOMENTERRETURN FOCUSZOOMENTERFUNCTION BUTTONYou can assign certain menu options to the 3 functionbuttons for instant operation.1. Select the required button from BUTTON1,BUTTON2 or BUTTON3 and press the ENTERbutton.2. Press F G I H to select the required menuoptions and press the ENTER button.Q BLANK functionYou can stop the projection temporary for electricalpower save. Press any button except the LIGHTand learning remote control buttons.BUTTON1/2/3HDMI 1 IN NORMALHDMI 2 IN DYNAMICHDMI 3 IN COLOUR1COMPUTER IN COLOUR2COMPONENT 1 IN CINEMA1COMPONENT 2 IN CINEMA2S-VIDEO IN CINEMA3VIDEO IN SPLIT ADJUSTBLANK WAVEFORM AUTOADJUSTAUTO SETUP MEMORY LOADCONTRAST BRIGHTNESSCONTRAST R BRIGHTNESS RCONTRAST G BRIGHTNESS GCONTRAST B BRIGHTNESS BRemote control Control panelSee “Navigating through the MENU” on page 30.See “Main menu and sub-menu” on page 28.