Panasonic PT-AE2000E Operating Instructions Manual

Also see for PT-AE2000E: Spec file Brochure & specs Service manual Service manual

Contents

ENGLISH - 31 SettingsPICTURE menuDepending on the projection environment, you can usethese preset parameter settings to optimise imageprojection. Press I H to cycle through the options.You can adjust the contrast of the projected image.Adjust the BRIGHTNESS in advance if necessary.Setting range: -64 to +64You can adjust the brightness of the projected image.Setting range: -32 to +32You can adjust the colour saturation of the projectedimage.Setting range: -32 to +32When COMPUTER signal is connected, only availablewith the following signals.1 125 (1 080)/60i 1 125 (1 080)/50i1 125 (1 080)/60p 1 125 (1 080)/50pYou can adjust the skin tone in the projected image.Setting range: -32 to +32When COMPUTER signal is connected, only availablewith the following signals.1 125 (1 080)/60i 1 125 (1 080)/50i1 125 (1 080)/60p 1 125 (1 080)/50pYou can adjust the sharpness of the projected image.Setting range will vary according to the selected inputsignal.PICTURE MODENORMAL CINEMA3DYNAMICCINEMA2COLOUR1COLOUR2 CINEMA1NORMAL Setting for a general image, suchas sports or gamesDYNAMIC Bright and sharp settingCOLOUR1Setting for HDTV standard in ITU-R BT. 709 and colour temperature6 500 K at the default setting ofthe PICTURE menu items.COLOUR2Setting for DCDM standard(SMPTE431-2) and colourtemperature 6 300 K at thedefault setting of the PICTUREmenu items.CINEMA1 Hollywood style coloursCINEMA2 Deeper and more rich coloursettingCINEMA3 Vivid and crisp colour settingNOTE:• It may take for a while until the selected mode isstabilised.Remote control Control panelSee “Navigating through the MENU” on page 30.See “Main menu and sub-menu” on page 28.CONTRASTBRIGHTNESSCOLOURTINTSHARPNESSHigherLowerBrighterDarkerDarkerLighterMoregreenishMorereddishMoresharpLesssharp