Panasonic PT-AE2000E Operating Instructions Manual

Also see for PT-AE2000E: Spec file Brochure & specs Service manual Service manual

Contents

PICTURE menuENGLISH - 33 SettingsQ Adjusting the image in a split window1. Select AREA SELECT and press the ENTERbutton.The image will be frozen and the area cursor will bedisplayed.2. Press I H to move the area cursor to select therequired area and press the ENTER button.The selected frozen image will be displayed in a splitwindow.3. Press the MENU to display the PICTURE menu onthe right.4. Adjust the required PICTURE menu items.The Other menu items are not available.Sub-menu items vary according to the selected inputsignal. See “Main menu and sub-menu” on page 28.5. Press MENU/RETURN button several times toescape from the menu.6. Press the ENTER button.The confirmation screen will be displayed. Select OKto finish the adjustment.7. Press the ENTER button.Press the ENTER button again to return to the AREASELECT.Press the RETURN button escape from the SPLITADJUST mode.You can perform more detailed image adjustmentmanually.J GAMMAYou can adjust linear intensity at 3 levels. Press IH to increase/decrease 1 point.Setting range: -8 to +8J CONTRASTYou can adjust the amount of contrast in RGBcolours individually. Press I H to increase/decrease 1 point.Setting range: -32 to +32J BRIGHTNESSYou can adjust the brightness in RGB coloursindividually. Press I H to increase/decrease1 point.Setting range: -16 to +16J NR (Noise Reduction)You can switch the automatic noise reductionsystem on/off. Press I H to select the requiredsetting.ON: Automatic noise reductionOFF: No noise reductionJ MPEG NRYou can switch the automatic noise reductionsystem for MPEG format images on/off. Thesystem minimise block noise and mosquito noiseto eliminate jagged edges, providing an overallsmoother image. Press I H to select the requiredsetting.ON: ActiveOFF: DeactiveMOVE AREA GO TO SPLIT ADJUSTENTER GO TO SPLIT ADJUSTENTERENTERPICTURE MODECONTRASTBRIGHTNESSCOLOURTINTSHARPNESSCOLOUR TEMPERATUREDYNAMIC IRISWAVEFORM MONITORADVANCED MENUSPLIT ADJUSTMEMORY SAVEMEMORY LOADMEMORY EDITPICTUREPOSITIONLANGUAGEFUNCTION BUTTONLENS CONTROLOPTIONSELECTNORMALONOFFRETURNADVANCED MENULevels Default settingGAMMA HIGH 0GAMMA MID 0GAMMA LOW 0RGB Default settingCONTRAST R 0CONTRAST G 0CONTRAST B 0RGB Default settingBRIGHTNESS R 0BRIGHTNESS G 0BRIGHTNESS B 0NOTE:• MPEG NR system is not available with COMPUTER/HDMI (VGA60) signals.