Panasonic PT-AE8000U Operating Instructions Manual

Also see for PT-AE8000EA: Service manual

Contents

Panasonic PT-AE8000U Operating Instructions Manual Manual pdf 97 page image

Using VIERA LinkENGLISH- 97 Appendix■ VIERA Link Control of compatibleequipment“Using [VIERA LINK]” ( page 98)z Table below displays maximum number of compatibleequipment that can be controlled by VIERA Link Control.This includes connections to equipment alreadyconnected to the projector.For example, DIGA Recorder connected to Amplifierwhich is connected to the projector via an HDMI cable.Type of the equipment MaximumnumberRecorder (DIGA Recorder, etc.) 3Player (DVD Player, Blu-ray DiscPlayer, HD Camcorder, LUMIX Camera,Digital Camera, Player theater, Blu-rayDisc theater, etc.)3Audio system (Player theater, Blu-rayDisc theater, Amplifier, etc.) 1Tuner (Set top box, etc.) 4VIERA Link “HDAVI Control”Connections to the equipment (DIGA Recorder, HDCamcorder, Player theater, Amplifier, etc.) with HDMIcables allow you to interface them automatically.These features are limited to models incorporating“HDAVI Control” and “VIERA Link”.z Some functions are not available depending on theequipment’s version of HDAVI Control.Please confirm the connected equipment’s version ofHDAVI Control. But some functions will not be able toperform even if the versions are the same.z VIERA Link “HDAVI Control”, based on the controlfunctions provided by HDMI which is an industry standardknown as HDMI CEC (Consumer Electronics Control), isa unique function that we have developed and added.As such, its operation with other manufacturers’equipment that supports HDMI CEC cannot beguaranteed.z Please refer to individual manuals for othermanufacturers’ equipment supporting Link function.z About applicable Panasonic equipment, consult yourlocal Panasonic dealer.■ Preparationsz Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.z Set up the connected equipment.Switch the connected equipment on.Set [POWER ON LINK] in the setup menu.(Please read the manual of the equipment for thesesetup.)z Set up the projector.Switch the projector on.Set the input mode to [HDMI 1 IN], [HDMI 2 IN]or [HDMI 3 IN], and make sure that an image isdisplayed correctly.Select [VIERA LINK SETTINGS] in the [OPTION]menu.If the [VIERA LINK] is set to [ON], you need to select[OFF] first, and then switch to [ON] again to activatethe [ON] setting.Notez This setup should be done each time when the followingconditions occur:- When using for the first time- When adding or reconnecting equipment- When changing setup