46- ENGLISHSettingsImage adjustSelect [Image adjust] from the Main Menu (see“Navigating through the menu” on page 37),then select the item from the sub-menu.Remote ControlControl PanelContrastPress ▲▼ to select [Contrast].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )OperationAdjustmentAdjustmentrangePress ►.increase the contrast Maximumvalue 63Press ◄.decrease thecontrastMinimumvalue 0BrightnessPress ▲▼ to select [Brightness].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )OperationAdjustmentAdjustmentrangePress ►.increase thebrightnessMaximumvalue 63Press ◄.decrease thebrightnessMinimumvalue 0ColorPress ▲▼ to select [Color].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )OperationAdjustmentAdjustmentrangePress ►.increase theintensity of the colorMaximumvalue 63Press ◄.decrease theintensity of the colorMinimumvalue 0NoteWhen input video signal to the projector, [Color] will beavailable.TintPress ▲▼ to select [Tint].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the tint value to3 )get a proper color balance.Adjustments can be made between0 and 63.NoteWhen you select [NTSC] or [NTSC4.43] in System menuunder Video input signal, [Tint] will be available.Color temp.Press ▲▼ to select [Color temp.].1 )Press the 2 )the adjustment dialog box.Press ◄► to select the desired Color3 )temp. level.You can select the desired [Color temp.] from[XLow], [Low], [Mid] or [High].Note[Color temp.] level displays [Colorboard] when the[Colorboard] is selected in the [Image select] menu.