Image adjustENGLISH -47SettingsRedPress ▲▼ to select [Red].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )OperationAdjustmentAdjustmentrangePress ►.deepen red toneMaximumvalue 63Press ◄.lighten red toneMinimumvalue 0GreenPress ▲▼ to select [Green].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )OperationAdjustmentAdjustmentrangePress ►.deepen greentoneMaximumvalue 63Press ◄.lighten greentoneMinimumvalue 0BluePress ▲▼ to select [Blue].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )OperationAdjustmentAdjustmentrangePress ►.deepen blue tone Maximumvalue 63Press ◄.lighten blue toneMinimumvalue 0SharpnessPress ▲▼ to select [Sharpness].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )OperationAdjustmentAdjustmentrangePress ►.increase thesharpness of theimageMaximumvalue 15Press ◄.decrease thesharpness of theimageMinimumvalue 0GammaPress ▲▼ to select [Gamma].1 )Press the 2 )the adjustment dialog box.Press ◄► to adjust the gamma value3 )to obtain a better balance of contrast.Adjustments can be made between0 and 15.Noise reductionPress ▲▼ to select [Noise reduction].1 )Press the 2 )the adjustment dialog box.Press ◄► to select the desired item3 )OffDisabledL1Lower reductionL2Higher reductionNoise interference on the screen can bereduced. Select one of the above options to getsmoother images.[Noise reduction] cannot be selected when[480p], [576p], [720p] or [1080i] is selected.NoteWhen input video signal to the projector, [Noisereduction] will become available.