59 ENGLISHADVANCED MENUDIGITAL CINEMA REALITY AUTOFORMAT SMPTEBLANKINGINPUT RESOLUTIONCLAMP POSITIONEDGE BLENDING ONSYNC.TERM 75RASTER POSITION:MENU SELECT:CHANGE ENTER:SUB MENUMAIN MENUPICTUREPOSITIONADVANCED MENULANGUAGEOPTIONTEST PATTERNSIGNAL LISTSECURITYEDGE BLENDINGUPPER START 0OFF WIDTH 128LOWER START 0OFF WIDTH 128LEFT START 0OFF WIDTH 128RIGHT START 0OFF WIDTH 128MARKER OFFBRIGHT ADJUST:MENU SELECT:ADJUST ENTER:CHANGEPress the “ENTER” button.The EDGE BLENDING screen will be displayed.Specify the area to be adjusted with thebuttons.To joint the top: set “UPPER” to “ON”.To joint the bottom: set “LOWER” to “ON”.To joint the left: set “LEFT” to “ON”.To joint the right: set “RIGHT” to “ON”.Press the “ENTER” button to toggle“ON” and “OFF”.Adjust the compensation width andstart position with the buttons.Select “MARKER” with thebuttons.Select “ON” with the ENTER buttons.The optimal point is wherethese lines overlap.Red line Red lineGreen line Green lineAdjustment markerWhen the “MARKER” is set to “ON”, the image position adjustmentmarker is displayed.The optimal point is the position where the red line of one frameoverlaps the green line of the other frame.Notice:The correction widths of the jointed frames must be the samevalue all the time.The optimal joint cannot be achieved if the jointed frames havedifferent correction widths.Edge blending adjustmentThis projector has the function to hide the seams for multi-screens.Procedure of adjustmentNotePress the “MENU” button.The MAIN MENU screen will be displayed.Select the “ADVANCED MENU” withthe buttons.Press the “ENTER” button.The ADVANCED MENU screen will be displayed.Select “EDGE BLENDING” with thebuttons.Select “OFF”, “ON” or “USER” with thebuttons.OFF: When the multi-screens are not going to beused.ON: When the tilting inside the unit is to be usedfor the tilting of the edge blending area.USER: When a specific tilting is to be used for thetilting of the edge blending area.(Separate software is required to establishthese settings. Consult your dealer.)(Continued on next page)
