65 ENGLISHA: Floor mount front projection (Front – Floor mount)D: Ceiling mount rear projection (Rear – Ceiling mount)C: Floor mount rear projection (Rear – Floor mount)B: Ceiling mount front projection (Front – Ceiling mount)Select the setting by displaying the on-screen indications using buttons of the remote control or the control panel onthe main unit.Procedure of settingOPTIONPROJECTOR ID 2SETTING FRONT-FLAMP SELECT DUALLAMP POWER HIGHRS232C SETTINGOSD POSITION 2SYSTEM INFORMATIONCOLOR MATCHING OFFVIDEO SETTINGAUTO SETUP:MENU SELECT:CHANGEMAIN MENUPICTUREPOSITIONADVANCED MENULANGUAGEOPTIONTEST PATTERNSIGNAL LISTSECURITY:MENU SELECTENTER:SUB MENUPress the “MENU” button.The MAIN MENU screen will be displayed.Select “OPTION” with thebuttons.Press the “ENTER” button.The OPTION screen will be displayed.Select “SETTING” with thebuttons and choose a projectionscheme with the buttons.Each time or button is pressed, the types ofprojection scheme, together with its indications, aretoggled through a cycle as follows:FRONT-F FRONT-CREAR-C REAR-FPress the “MENU” button twice.The on-screen indications disappear and thenormal screen appears again.Installation SettingA projection scheme can be chosen depending on the installation of the projector. If the picture is shown upsidedown or in reverse, change the projection scheme using the following figures A to D.
