95 ENGLISHPress the “ENTER” button.The OPTION screen will be displayed.Select “NETWORK SETTING” with thebuttons.Returning the network function setting back to thefactory settingUsing the following procedure, the user can return all settings of network function such as IP address,password and Email setting to the factory setting.Procedure of settingPress the “MENU” button.The MAIN MENU screen will be displayed.Select “OPTION” with thebuttons.Press the “ENTER” button.The NETWORK SETTING screen will bedisplayed.Select “STORE” with thebuttons.Hold down the “Standard (STD)” buttonfor 3 seconds.A confirmation screen will be displayed.To cancel, press the “MENU” button. TheNETWORK SETTING screen will be displayed.Press the “ENTER” button.The IP address, password, E-mail settings and allthe other network function settings are returned tothe factory defaults.OPTIONPROJECTOR ID 2SETTING FRONT-FLAMP SELECT DUALLAMP POWER HIGHRS232C SETTINGOSD POSITION 2SYSTEM INFORMATIONCOLOR MATCHING 3COLORSVIDEO SETTINGNETWORK SETTING:MENU SELECTENTER:SUB MENUMAIN MENUPICTUREPOSITIONADVANCED MENULANGUAGEOPTIONTEST PATTERNSIGNAL LISTSECURITY:MENU SELECTENTER:SUB MENUNETWORK SETTINGHOST NAME PROJECTORDHCP OFFIP ADDRESS 192.168. 0. 8PORT 80NET MASK 255.255.255. 0GATEWAY 192.168. 0. 1MAC ADDRESS 00.00.00.00.00.00STORE:MENU SELECTENTER:ADJUSTWOULD YOU LIKE TO CANCELALL NETWORK SETTINGS BACK TOFACTORY SHIPMENT STATUS?OK ESC:CHANGE ENTER:SET
