68Option settingsAdjusting colour matchingWhen multiple sets are used simultaneously, this projector allows the user to correct the difference of coloursamong the sets.Procedure of adjustmentOPTIONPROJECTOR ID 2SETTING FRONT-FLAMP SELECT DUALLAMP POWER HIGHRS232C SETTINGOSD POSITION 2SYSTEM INFORMATIONCOLOR MATCHING 3COLORSVIDEO SETTINGAUTO SETUP:MENU SELECT :CHANGEENTER:SUB MENUPress the “MENU” button.The MAIN MENU screen will be displayed.Select “OPTION” with thebuttons.MAIN MENUPICTUREPOSITIONADVANCED MENULANGUAGEOPTIONTEST PATTERNSIGNAL LISTSECURITYPress “ENTER” button.The OPTION screen will be displayed.Select “COLOR MATCHING” with thebuttons.Select “3COLORS” with thebuttons.COLOR MATCHING:3COLORSRGBAUTO TESTPATTERN OFFPress the “ENTER” button.Select “R”, “G” and “B” with thebuttons.Press “ENTER” button.Adjust the values with thebuttons.These values can be adjusted from 0 to 2048.3COLORS:RR 2048G 0B 0:MENU SELECT:ADJUSTAdjustment• The effects of correcting the adjustment colourWhen tuning the correction colour that is the same as the adjustment colour: the brightness of the adjustmentcolour changes.When tuning the correction colour RED: RED is added to or reduced from the adjustment colour.When tuning the correction colour GREEN: GREEN is added to or reduced from the adjustment colour.When tuning the correction colour BLUE: BLUE is added to or reduced from the adjustment colour.• This adjustment should be carried out by a person who is familiar with the projector or by a service personbecause a high level of skill is required to make successful adjustment.• Pressing the “STD” (standard) button will restore the factory defaults for all items.• When any setting other than “OFF” has been selected for colour matching, the COLOUR TEMP. setting is fixedat “USER1”NoteNote • When “7COLORS” is selected in step ,it is possible to adjust the 7colours of “R”,“G”, “B”, “Cy”, “Mg”, “Ye” and “Wh”.