[PICTURE] menuENGLISH - 65 SettingsSelect [PICTURE] from the main menu, andselect the item from the sub-menu.Refer to “Navigating through the menu”( page 61) for the operation of the menuscreen.z After selecting the item, press ▲▼◀▶ to set.[PICTURE MODE]You can switch to the desired picture mode suitablefor the image source and the environment in whichthe projector is used.1) Press ▲▼ to select [PICTURE MODE].2) Press ◀▶ .▶z The [PICTURE MODE] individual adjustmentscreen is displayed.3) Press ◀▶ to switch the [PICTUREMODE].▶z The setting will change as follows each timeyou press the button.[STANDARD] [CINEMA] [NATURAL][USER] [DICOMSIM.][GRAPHIC] [DYNAMIC][STANDARD] The picture becomes suitable formoving images in general.[CINEMA] The picture becomes suitable formovie sources.[NATURAL] The picture is sRGB compliant.[DICOM SIM.]The picture becomes similar tothat of DICOM Part14 GrayscaleStandard.[DYNAMIC] The light output is maximized for usein bright areas.[GRAPHIC] The picture becomes suitable forinput from to the personal computer.[USER] Set any desired picture mode.Notez The factory default picture mode is [GRAPHIC] forstill image input signals and [STANDARD] for moviebased input signals.z DICOM is an abbreviation for “Digital Imaging andCommunication in Medicine” and is a standard formedical imaging devices. Although the DICOMname is used, the projector is not a medical device,and should not be used for purposes such asdiagnosis of display images.z Press the button when each [PICTUREMODE] is selected to save as a specified valuewhen a new signal is input. The data of all itemsexcept [SYSTEM SELECTOR] in the [PICTURE]menu is saved.z In the factory default settings, [USER] is setto images that comply with the ITU-R BT.709standard.▶■ To change the [USER] name4) Select [USER] in Step 3).5) Press the button.▶z The [PICTURE MODE] detailed screen isdisplayed.6) Press ▲▼ to select [PICTURE MODENAME CHANGE].7) Press the button.▶z The [PICTURE MODE NAME CHANGE]screen is displayed.8) Press ▲▼◀▶ to select the character,and press the button toenter the character.9) Press ▲▼◀▶ to select [OK], andpress the button.▶z The picture mode name is changed.[PICTURE] menu
