[POSITION] menu74 - ENGLISHSettings[CLOCK PHASE]You can adjust to achieve an optimal image whenthere is a flickering image or smeared outlines.1) Press ▲▼ to select [CLOCK PHASE].2) Press ◀▶ or the button.▶z The [CLOCK PHASE] individual adjustmentscreen is displayed.3) Press ◀▶ to adjust the level.▶z Adjustment value will change between [0] and[31]. Adjust so that the amount of interference isat a minimum.Notez Certain signals may not be adjustable.z Optimal value may not be achieved if the outputfrom the input computer is unstable.z Optimal value may not be achieved when there is ashift in the total dot numbers.z [CLOCK PHASE] can be adjusted only when asignal is input to the terminal or the terminal.z [CLOCK PHASE] cannot be adjusted when a digitalsignal is input.z If you press ▶ while the adjustment value is [31],the value will become [0]. If you press ◀ while theadjustment value is [0], the value will become [31].[GEOMETRY] (PT-DZ21KU andPT-DS20KU only)Correct various types of distortion in a projectedimage.Unique image processing technology enablesprojection of a square image on a special screenshape.1) Press ▲▼ to select [GEOMETRY].2) Press ◀▶ to switch the [GEOMETRY]setting.▶z The setting will change as follows each timeyou press the button.[OFF] [KEYSTONE][PC] [CURVED][OFF] Does not perform geometricadjustment.[KEYSTONE] Adjusts any trapezoidal distortion inthe projected image.[CURVED] Adjusts any curved distortion in theprojected image.[PC] *1 Uses the computer to performgeometric adjustment.*1: Advanced skills are necessary to use a computer to controlgeometric adjustment. Consult your dealer.3) Select [KEYSTONE] or [CURVED]in Step 2), and press the button.▶z The [GEOMETRY:KEYSTONE] or[GEOMETRY:CURVED] screen is displayed.4) Press ▲▼ to select the item you wantto adjust, and press ◀▶ to adjust thecorrection amount.▶z The projected image can be corrected.▶■ [KEYSTONE]▶z[LENS THROW RATIO]Set the throw ratio for the lens used.▶z[VERTICAL KEYSTONE]
