Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 103Notef Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the switch of the projector body is turned.Setting [INPUT GUIDE]Set whether to display the input guide (input terminal name, signal name, and memory number currently selected) in the position set in the[OSD POSITION].1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [INPUT GUIDE].4) Press qw to switch the item.f The items will switch each time you press the button.[ON] Displays the input guide.[OFF] Hides the input guide.Setting [WARNING MESSAGE]Set the display/hide of the warning message.1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [WARNING MESSAGE].4) Press qw to switch the item.f The items will switch each time you press the button.[ON] Displays the warning message.[OFF] Hides the warning message.[BACK COLOR]Set the display of the projected screen when there is no signal input.1) Press as to select [BACK COLOR].2) Press qw to switch the item.f The items will switch each time you press the button.[BLUE] Displays the entire projection area in blue.[BLACK] Displays the entire projection area in black.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.Notef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
