Chapter 4 Settings — Menu navigation68 - ENGLISHSub-menu item Factory default Page[CLAMP POSITION] [24]*1 86[EDGE BLENDING] [OFF] 87[FRAME RESPONSE] [NORMAL] 88[FRAME LOCK]*2 [OFF] 89[RASTER POSITION] ― 89*1 Depends on the signal input.*2 Only for PT-DZ13KE, PT-DS12KE, PT-DZ10KENotef Sub-menu items and factory default settings differ depending on the selected input terminal.[DISPLAY LANGUAGE]Details (x page 90)[3D SETTINGS](Only for PT-DZ13KE, PT-DS12KE, PT-DW11KE)Sub-menu item Factory default Page[3D SYSTEM SETTING] [SINGLE] 91[3D SYNC SETTING] — 91[3D SIMUL INPUT SETTING] — 92[3D INPUT FORMAT] [AUTO]*1 92[LEFT/RIGHT SWAP] [NORMAL] 93[3D COLOR MATCHING] [SHARED 2D/3D] 93[3D PICTURE BALANCE] — 93[DARK TIME SETTING] [1.5 ms] 94[3D FRAME DELAY] [0us] 94[3D TEST MODE] [NORMAL] 94[3D TEST PATTERN] — 95[SAFETY PRECAUTIONS MESSAGE] [ON] 95[3D SAFETY PRECAUTIONS] ― 95*1 Depends on the selected input terminal.[DISPLAY OPTION]Sub-menu item Factory default Page[COLOR MATCHING] [OFF] 96[LARGE SCREEN CORRECTION] [OFF] 97[SCREEN SETTING]*1 ― 97[AUTO SIGNAL] [OFF] 98[AUTO SETUP] ― 98[RGB IN] ― 99[DVI-D IN] ― 100[HDMI IN] ― 100[SDI IN]*1 ― 100[ON-SCREEN DISPLAY] ― 102[BACK COLOR] [BLUE] 103[STARTUP LOGO] [DEFAULT LOGO] 104[UNIFORMITY] ― 104[SHUTTER SETTING] ― 105[FREEZE] ― 105[WAVEFORM MONITOR] [OFF] 105[CUT OFF] — 107*1 Only for PT-DZ13KE, PT-DS12KE, PT-DZ10KE.
