Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 992) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [POSITION ADJUST].4) Press qw to switch the item.[OFF] Does not perform automatic adjustment.[ON] Adjust the screen position and size when automatic setup is executed.Adjusting signal level automatically1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [SIGNAL LEVEL ADJUST].4) Press qw to switch the item.[OFF] Does not perform automatic adjustment.[ON] Adjusts black level (on-screen menu [BRIGHTNESS]) and white level (on-screen menu[CONTRAST]) when automatic setup is executed.Notef [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.[RGB IN]Set to match the signal to input to the terminal.Setting [RGB1 INPUT SETTING]1) Press as to select [RGB IN].2) Press the button.f The [RGB IN] screen is displayed.3) Press as to select [RGB1 INPUT SETTING].4) Press qw to switch the item.f The items will switch each time you press the button.[RGB/YPB PR ] Select when inputting an RGB signal or YC BC R /YPB PR signals to the terminal.[Y/C] Select when inputting a luminance signal and color signal to the terminal.Switching the slice level of an input sync signal1) Press as to select [RGB IN].2) Press the button.f The [RGB IN] screen is displayed.3) Press as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].4) Press qw to switch the item.[LOW] Sets the slice level to [LOW].[HIGH] Sets the slice level to [HIGH].
