Chapter 4 Settings — [PICTURE] menu76 - ENGLISHNotef If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value willbecome [+15].[NOISE REDUCTION]You can reduce noises when the input image is degraded and noise is occurring in the image signal.1) Press as to select [NOISE REDUCTION].2) Press qw or the button.f The [NOISE REDUCTION] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] No correction.[1] Slightly corrects the noise.[2] Moderately corrects the noise.[3] Strongly corrects the noise.Attentionf When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].[DYNAMIC IRIS]Aperture correction and signal compensation are performed automatically based on the image to result in an image of optimum contrast.1) Press as to select [DYNAMIC IRIS].2) Press qw or the button.f The [DYNAMIC IRIS] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] No correction.[1] Slightly corrects aperture and compensate signals.[2] Moderately corrects aperture and signal.[3] Strongly corrects aperture and signal.[USER] Set any desired correction.Refer to “Adjusting desired correction amount” (x page 76) for details.Adjusting desired correction amount1) Press as to select [DYNAMIC IRIS].2) Press qw or the button.f The [DYNAMIC IRIS] individual adjustment screen is displayed.3) Press qw to select [USER].4) Press the button.f The [DYNAMIC IRIS] screen is displayed.5) Press as to select [AUTO IRIS], [MANUAL IRIS], or [DYNAMIC GAMMA].6) Press qw to adjust the correction amount.Item Adjustment[AUTO IRIS](Automatic adjustment ofaperture)[OFF] No correction.[1] - [255] Allows you to set in increments of 1. The larger the value, thestronger the correction.[MANUAL IRIS](Fixed adjustment of aperture)[OFF] No correction.[1] - [255] Allows you to set in increments of 1. The larger the value, thestronger the correction.
