Panasonic PT-F100E Operating Instructions Manual

Also see for PT-F100E: Service manual Operating instructions

Contents

Panasonic PT-F100E Operating Instructions Manual Manual pdf 12 page image

ENGLISH - 12PreparationRead this firstWhen you start the projection for the first time, the minimum required setting screen for projection will be displayed.J LANGUAGESelect the required language setting.Press F G I H buttons of the Remote control orControl panel on the projector to highlight therequired language, and press ENTER to proceed tothe next setting.J OPTIONSelect the current projection method and fan speedsetting. If you need return to the previous setting,press the RETURTN button.INSTALLATIONPress I H buttons of the Remote control orControl panel on the projector to select therequired installation method. Press G to proceed tothe HIGHLAND setting.HIGHLANDIf you use the projector at high elevation, theHIGHLAND setting need to be ON to set the fanspeed high. Press I H to select the requiredoption. If you need to return to the INSTALLATION,press F.OFF The fan speed is low.ON The fan speed is high.Press the ENTER button to start the projection.Once you finish the minimum requirement setting, it will not be displayed again unless the projector isinitialised. See “INITIALISE ALL” on page 38.You can change the settings from the MAIN MENU. See “Menu Navigation” on page 29.Minimum required setting screenLANGUAGESELECTENTERINSTALLATIONOPTIONFRONT/DESKHIGHLAND OFFSELECTENTERRETURNFRONT/DESK Setting on a desk/floor andprojecting from frontFRONT/CEILING Mounting in the ceiling andprojecting from frontREAR/DESK Setting on a desk/floor andprojecting from rearREAR/CEILING Mounting in the ceiling andprojecting from rearNOTE:• At 1 400 m (4 593 ft) above sea level, the setting mustbe ON.• The loudness of fan noise depends on the HIGHLANDsetting.