ENGLISH - 13 PreparationAbout Your ProjectorBattery compartment1. Press the tab and lift up the cover.2. Insert the batteries according to the polarity diagramindicated inside.Top viewRemote control signal and Laser pointerbeam emitters. (page 25)Attaching a hand strapYou can attach a favourite strapon to the Remote control.Remote control indicatorIf you press any button except theLASER button, the Remote controlindicator will flash. If you press theLASER button, it will lit.Remote controlPOWER buttonWhile the MAIN POWER is on,switch between stand-by modeand projection mode.(page 22)INPUT SELECT buttonsSwitch the required inputsignal button to select.NETWORK button isonly for PT-F100NTE.See CD-ROM contents.Project a laser pointer.(page 26)PAGE buttons are onlyfor PT-F100NTE.See CD-ROM contents.Display the MAIN MENU.(page 29)Navigate through themenus with FGIH, andactivate the menu item withENTER. (page 29)Reset some of the settings tothe factory default settings.(page 27)Turn off the projectiontemporarily.Display the frozen imagewhile the display ofsubsequent imagescontinues. (page 27)MULTI-LIVE is onlyfor PT-F100NTE.See CD-ROMcontents.COMPUTER SEARCHbutton is only forPT-F100NTE.See CD-ROM contents.Control to change thescale by means of digitalzoom. (page 28)Control to adjust thevolume of the speakers.(page 28)Return to the previous menu.(page 29)Capture the projected imageas a frozen picture. (page 27)Automatically adjust thesetting of DOT CLOCK,CLOCK PHASE and SIGNALSEARCH for the projectedimage of COMPUTER signal.(page 25)Remote controlindicatorNOTE:• Do not drop the Remote control.• Avoid contact with liquids or moisture.• Use manganese batteries or alkaline batteries with the Remote control.• Do not attempt to modify or disassemble the Remote control. Contact an Authorised Service Centre for repairs.• Do not keep pressing the Remote control buttons as this may shorten battery life.• Do not point the laser in other people’s eyes or stare into beam.• See “Remote control operation” on page 25.