Panasonic PT-F100E Operating Instructions Manual

Also see for PT-F100E: Service manual Operating instructions

Contents

Panasonic PT-F100E Operating Instructions Manual Manual pdf 29 page image

ENGLISH - 29 SettingsMenu NavigationThe menu system allows you to access functions which do not have their own dedicated buttons on the Remotecontrol. The menu options are structured and categorised. You can navigate through the menu with F G H Ibuttons.J Displaying the Main menuPress the MENU button to display the Mainmenu and the operating guidance.J Adjusting with the bar scaleitemsThe triangle mark under the bar indicates factorydefault setting and the square indicates the currentsetting.J Returning to the previous menuPress the MENU or RETURN button to return tothe previous menu. Press repeatedly to escapefrom the menu mode and return to theprojection.J Operating procedure1. Press F G to scroll to the required Main menuitem and press ENTER to select.The selected item is highlighted in orange and theSub-menu is displayed on the right.See “Main menu and Sub-menu” on page 30.2. Press F G to scroll to the required Sub-menuitem and press I H or ENTER to adjust.The selected item is called up and the other menuitems disappear from the screen. Called up item willbe disappear after 5 seconds and return to the menumode.If there is a lower level, the next level will bedisplayed.3. Press I H to adjust or set the selected item.For items using a bar scale, the current settings aredisplayed on the left of the bar scale.You can cycle through the options of an item bypressing I H.4. Press MENU or RETURN to return to the previousmenu.Navigating through the MENUPICTUREPOSITIONPICTURE MODECONTRASTBRIGHTNESSCOLOURTINTSHARPNESSCOLOUR TEMPERATUREDAYLIGHT VIEWDETAILED SETUPLANGUAGEOPTIONSECURITYNETWORKSTANDARDSTANDARDAUTOSELECTENTERRETURNMain menu Sub-menuCurrentsettingsOperating guidanceContains the required buttons to adjust the settings.KEYSTONEKEYSTONECurrent settingDefaultPICTUREPOSITIONKEYSTONEPOSITIONDOT CLOCKCLOCK PHASEASPECTRESIZINGFRAME LOCKLANGUAGEOPTIONSECURITYNETWORK4:3ONOFFSELECTENTERRETURNSELECTDEFAULTENTERRETURNPICTUREPOSITIONKEYSTONEPOSITIONDOT CLOCKCLOCK PHASEASPECTRESIZINGFRAME LOCKLANGUAGEOPTIONSECURITYNETWORK4:3ONOFFKEYSTONEKEYSTONENOTE:• See “Resetting to the factory default settings” on page 27 to reset each menu items.• See “INITIALISE ALL” on page 38 to reset all the settings.