Panasonic PT-F300EA Operating Instructions Manual

Also see for PT-F300E: Operating instructions Service manual Service manual

Contents

Panasonic PT-F300EA Operating Instructions Manual Manual pdf 18 page image

Getting StartedSetting upENGLISH - 18You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,See “INSTALLATION” on page 44.You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle.See “Positioning the image” on page 26.Projection methodJ Setting on a desk/floor andprojecting from frontJ Setting on a desk/floor andprojecting from rearINSTALLATION: FRONT/DESK INSTALLATION: REAR/DESKJ Mounting on the ceiling andprojecting from frontJ Mounting on the ceiling andprojecting from rearINSTALLATION: FRONT/CEILING INSTALLATION: REAR/CEILINGNOTE:• A translucent screen is required for rear projection.• When mounting the projector on the ceiling, the optional ceiling mount bracket (ET-PKF100H, ET-PKF100S) is required.• See “Ceiling mount bracket safeguards” on page 58.Front leg adjusters and throwing angleNOTE:• Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly.• If keystone distortion occurs, see “KEYSTONE” on page 37.• Screw up the adjuster legs, and an audible click will be heard as the limit.