Panasonic PT-F300EA Operating Instructions Manual

Also see for PT-F300E: Operating instructions Service manual Service manual

Contents

Panasonic PT-F300EA Operating Instructions Manual Manual pdf 38 page image

SettingsPOSITION menuENGLISH - 38You can switch the aspect ratio manually when needed.Press I H to cycle through the options.J Aspect ratio optionsQ AUTOSignals which contains an identifying aspect signalwill be detected and automatically project theimage in proper ratio. (NTSC and 525i (480i)signals only)Q 4:3When a 4:3 or 5:4 signal is detected, the image willbe projected without any change, and other signalswill be adjusted to 4:3 with preserving original ratio.Q 16:9When a16:9 is input, the image will be projectedwithout any change, and other signals will beadjusted to 16:9 without preserving original ratio.Q S4:3The input signal will be sized down 75 % andprojected. When projecting 4:3 signal on to a 16:9screen, it will be sized down 75 % with preservingoriginal ratio.Q THROUGHThe image will be projected without any sizeadjustment.ASPECTNOTE:• If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Selectan aspect ratio which preserves the intention of the image creator.• The order of ASPECT types is defined not only by the input method but also by the input signals. See “List of compatiblesignals” on page 54.• If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place,such as a restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law.• Selectable aspect ratio options vary according to input signals.