Panasonic PT-F300EA Operating Instructions Manual

Also see for PT-F300E: Operating instructions Service manual Service manual

Contents

Panasonic PT-F300EA Operating Instructions Manual Manual pdf 56 page image

AppendixTechnical InformationENGLISH - 56J Cable specifications(When connected to a personal computer)J Control commandsYou can switch the signals which to output from the COMPUTER1 OUT terminal by pressing the computer keycommand. The key commands are depend on the manufactures. If you select the computer terminals which has nosignals while the INPUT GUIDE is set to DETAILED, the computer connection guidance will be displayed.Command Control contents RemarksPON Power ON In standby mode, all commands other than the PON command are ignored.The PON command is ignored during lamp ON control.POF Power OFFIf a PON command is received while the cooling fan is operating after the lamp hasswitched off, the lamp is not turned back on again straight away in order to protectthe lamp.AVL Volume Parameter000 - 063 (Adjustment value 0 - 63)IIS INPUTParameter:VID = VIDEORG1 = COMPUTER1DVI = DVISVD = S-VIDEORG2 = COMPUTER2NWP = NETWORKQ$S Lamp condition queryCall back0 = Standby1 = Lamp ON control active2 = Lamp ON3 = Lamp OFF control activeOSH AV MUTETurning off the projection and sound temporarily.Send the command to switch between ON and OFF.Do not send the command consecutively.Computer connection guidanceManufacturer Key command Manufacturer Key command Manufacturer Key commandPanasonicNEC +TOSHIBASHARPHP+IBMSONY +AppleFUJITSU + EPSONDELL + Others +NOTE:• The computer connection guidance will disappear after 5 minutes.• Please refer the instructions which provided with the computers for more detailed information.NCNCNCNCNCNCNCNCProjector PC (DTE)