Panasonic PT-FX400U Operating Instructions Manual

Also see for PT-FW430EA: Operating instructions Specifications

Contents

Panasonic PT-FX400U Operating Instructions Manual Manual pdf 21 page image

ENGLISH - 21 Getting StartedSetting upProjection methodYou can use the projector with any of the following 4 projection methods. To set the desired method in the projector.J Mounting on the ceiling andprojecting forwardJ Setting on a desk/floor andprojecting from rear(Using translucent screen)Menu Û MethodPROJECTIONMETHOD FRONT/CEILINGMenu Û MethodPROJECTIONMETHOD REAR/DESKJ Mounting on the ceiling andprojecting from rear(Using translucent screen)J Setting on a desk/floor andprojecting forwardMenu Û MethodPROJECTIONMETHOD REAR/CEILINGMenu Û MethodPROJECTIONMETHOD FRONT/DESKRefer to “PROJECTION METHOD” of “PROJECTION SETUP menu” (½Û Æpages 57) for details.AttentionFor optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light fixtureszor other light is at a minimum. Also draw the curtains, close blinds and turn off light fixtures.Do not use the projector installed vertically or tilted right or left. Use under such conditions could result in equipmentzdamage.The projector must be installed so that its inclination to the horizontal plane is ±30° or less.zInstalling the projector at an inclination that exceeds 30° may reduce product life or result inzmalfunction.Parts for ceiling mount (Optional)You can install the projector on the ceiling using the optional ceiling mount bracket (ET-PKF110H: for high ceiling,ET-PKF110S½ for low ceiling).Use only the ceiling mount brackets specified for this projector.zRefer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.zBe sure to consult your dealer when using the ceiling mount bracket for the PT-F300U/PT-FW300U (ET-zPKF100H for high ceilings or ET-PKF100S for low ceilings).AttentionTo ensure projector performance and security, installation of the ceiling mount bracket must be carried by yourzdealer or a qualified technician.