Panasonic PT-FX400U Operating Instructions Manual

Also see for PT-FW430EA: Operating instructions Specifications

Contents

Panasonic PT-FX400U Operating Instructions Manual Manual pdf 63 page image

PROJECTOR SETUP menuENGLISH - 63 SettingsTEST PATTERNThe test patterns do not reflect position, size andother adjustments. Be sure to display the input signalbefore making any test pattern settings.Press ▲▼ to select [TEST PATTERN].1 )Press the button.2 ) [TEST PATTERN] will be displayed.zPress ◄► to switch test patterns.3 ) You can return to [PROJECTOR SETUP] byzpressing the or button.Display sequence of internal testJpatternsEach press of the ◄► buttons switches the testpatterns as shown below.Horizontal linesVertical linesDotsCross hatchAll whiteColor barsWhite cross onblack backgroundBlack cross onwhite backgroundNoteThe default screen is all white. If you assign this toz to , Cross hatch becomes thedefault.INITIALIZE ALLUse the steps below to return all adjusted “MENU”items to their factory defaults.When you perform this function, the projector entersstandby mode to initialize.Press ▲▼ to select [INITIALIZE ALL].1 )Press the button.2 ) [INITIALIZE ALL] appears.zA password must be entered, whenz[PASSWORD] in the [SECURITY] menu is setto [ON]. (Æpage 64)Press ◄► to select [OK].3 )Press the button.4 ) The [NOW INITIALIZING…] screen appears,zand is followed by [POWER OFF].Follow the screen instructions to turn5 )off the power (Æpage 30).All other key operations are unavailable at thisztime.The [LANGUAGE] and [INITIAL SETTING]zscreens appear the next time the projector isstarted. (Æpage 16)NoteProjector runtime, lamp runtime and [NETWORK]zsettings are not initialized.After performing [INITIALIZE ALL], the password iszreturned to its factory default and [PASSWORD] isset to [OFF].