DISPLAY OPTION menuENGLISH - 51 SettingsCLOSED CAPTION SETTING[Only for NTSC, 525i (480i) input]Set the closed caption display as follows.Press ▲▼ to select [CLOSED1 )CAPTION SETTING].Press the button.2 ) The [CLOSED CAPTION SETTING] screen iszdisplayed.Press ▲▼to select, and press ◄► to3 )switch.CLOSED CAPTIONJDisplays or hides the closed caption.Each press of the button switches the settings aszshown below.When you set the function to [ON], a message,z[If the input matches the CC type selected, theSECURITY TEXT/LOGO will not be displayed], isdisplayed on the screen. Select [OK] or [CANCEL],and press the button.OFF ONOFF Turns off closed caption displayON Turns on closed caption displayMODEJSelects a closed caption mode.Each press of the button switches the settings aszshown below.CC1 CC2CC4 CC3CC1 Displays CC1 dataCC2 Displays CC2 dataCC3 Displays CC3 dataCC4 Displays CC4 dataNoteThe closed caption is mainly used in the north America.zThis function shows the text information contained in theimage signal. Captions may not be displayed on somedevices or software.You can select [CLOSED CAPTION] only when NTSC orz525i (480i) signals are input.Security messages (security texts and user logo) are notzdisplayed when the closed caption signal of the selectedmode is input. (Æpage 65)Part of characters may not be displayed when highzcompensation values are set in [KEYSTONE].Closed captions are not displayed while the menu screenzappears.SCREEN SETTING[PT-FW430U only]When the projection image aspect ratio is changed,the projector makes corrections to ensure the optimalimages for the set screen size.Set this in accordance with the screen you are using.Press ▲▼ to select [SCREEN1 )SETTING].Press the button.2 ) The [SCREEN SETTING] screen will bezdisplayed.Press ▲▼ to select items and ◄► to3 )switch settings.SCREEN FORMATJEach press of the button switches the settings aszshown below.16:9 16:1016:9 For screens with a 16:9 aspect ratio16:10 For screens with a 16:10 aspect ratioSCREEN POSITIONJEach press of the button switches the settings aszshown below.LOW CENTER HIGHLOW Displays the projected image inthe lower part of the screenCENTER Displays the projected image inthe center part of the screenHIGH Displays the projected image inthe top part of the screenNote[SCREEN POSITION] cannot be adjusted when [16:10]zis selected for [SCREEN FORMAT].
