Chapter 7 Appendix — Specifications150 - ENGLISHList of compatible signalsThe following table specifies the HDMI input video signal that the projector can project.Mode Resolution(Dots)Scanning freq. Dot clock freq.(MHz) Plug and play*1Horizontal(kHz)Vertical(Hz)525 (480) /60i 1 440(720) x 480 15.7 59.9 27.0 ―625 (576) /50i 1 440(720) x 576 15.6 50.0 27.0 ―525p (480) /60p 720 x 480 31.5 59.9 27.0 l625p (576) /50p 720 x 576 31.3 50.0 27.0 l750 (720) /60p 1 280 x 720 45.0 60.0 74.3 l750 (720) /50p 1 280 x 720 37.5 50.0 74.3 l1125 (1080) /60i 1 920 x 1 080 33.8 60.0 74.3 l1125 (1080) /50i 1 920 x 1 080 28.1 50.0 74.3 l1125 (1080) /60p 1 920 x 1 080 67.5 60.0 148.5 l1125 (1080) /50p 1 920 x 1 080 56.3 50.0 148.5 l640 x 480 640 x 480 31.5 59.9 25.2 l800 x 600 800 x 600 35.2 56.3 36.0 l800 x 600 37.9 60.3 40.0 l1024 x 768 1 024 x 768 48.4 60.0 65.0 l1280 x 720 1 280 x 720 37.1 49.8 60.5 ―1 280 x 720 44.8 59.9 74.5 ―1280 x 768 1 280 x 768 39.6 49.9 65.3 ―1 280 x 768 47.8 59.9 79.5 ―1280 x 800 1 280 x 800 41.3 50.0 68.0 ―1 280 x 800 49.7 59.8 83.5 l1280 x 1024 1 280 x 1 024 64.0 60.0 108.0 ―1600 x 900 1 600 x 900 46.4 49.9 96.5 ―1 600 x 900 56.0 59.9 118.3 ―*1 Signals with a l in the Plug and play columns are signals described in EDID (extended display identification data) of the projector. A signal, whichhas no l in the Plug and play columns but has an entry in the Format column, can be input. For signals without a l in the Plug and play columns,there are instances when resolution cannot be selected on the computer even though the projector supports them.Notef The picture quality may degrade due to image process depending on the input signal.
