Panasonic PT-JX200HBU Operating Instrucctions

Contents

Chapter 4 Settings — [LIGHTING] menuENGLISH - 67[LIGHTING] menuOn the menu screen, select [LIGHTING] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.f After selecting the item, press asqw to set.[LIGHTING]Enable/disable the setting items in the [PATTERN] menu.1) Press as to select [LIGHTING].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] The spotlight and frame gradation do not appear, and [BACK GROUND] changes to [THROUGH].[ON] The spotlight based on the items set in [PATTERN] is displayed.[PATTERN]Set the spotlight, background and frame gradation.You can register the spotlight, background and frame gradation under [PATTERN] for [USER1] to [USER5].1) Press as to select [PATTERN].2) Press qw.f The [PATTERN] individual adjustment screen is displayed.3) Press qw to select [USER1] to [USER5].4) Press the button.f The [PATTERN] detailed setting screen is displayed.5) Press as to select the item to adjust and press qw to set the item.[CIRCULER TYPE]Set the circuler type of the spotlight.[TYPE1] Set the circular type to clear edge.[TYPE2] Set the circular type to gradient edge.[BACK GROUND]Set the background of the spotlight.[THROUGH] Set the background of the spotlight to the input image.[BLACK] Set the background of the spotlight to black.[FRAME GRADATION]Set the gradation of the outer periphery of the input image.[OFF] Keep the outer periphery of the input image.[ON] Set the outer periphery of the input image to gradient edge.[SPOT LIGHT1] Set each spotlight separately.Set each spotlight to [ON] / [OFF] separately. Up to three spotlights can be displayed at the same time.The position and size of each spotlight can be adjusted.[SPOT LIGHT2][SPOT LIGHT3]Notef When [BACK GROUND] is set to [BLACK], the resolution is fixed to 1 024 x 768/60p.f When [BACK GROUND] is set to [BLACK] and the spotlight is displayed by pressing the button, no audio is output. In thiscase, when adjusting the volume by the / buttons, the adjustment value on the adjustment screen changes, but still no audiois output. It is not a malfunction.f When [BACK GROUND] is set to [THROUGH], the spotlight and frame gradation differ depending on the resolution of the input image. (Thespotlight size is smaller under a higher resolution and bigger under a lower resolution.)f If there is no HDMI signal after switching to HDMI input and [BACK GROUND] is set to [THROUGH], no spotlight appears even when youset [LIGHTING] to [ON].f When [BACK GROUND] is set to [BLACK], [NO SIGNAL SHUT-OFF] and [NO SIGNAL LIGHTS-OUT] under the [ECO MANAGEMENT]menu do not work even if the no-signal status continues.