Chapter 3Basic Operations—Projecting52 - ENGLISHProjectingThe projection will start after confirming the connection with the external device (xpage43), turning on thepower of the track system, and then turning on the projector(xpage47). Select the input to project, and adjustthe state of the projected image.Selecting the inputSwitch the input to project.The input for projection can be switched directly by pressing the input selection button on the remote control.1)Press the,,,APP>, or button onthe remote control to select the input.fImage of the selected input is projected.Remote control buttonInputUsageHDMISwitches the input to HDMI.Displays the image input to the terminal from theexternal device.Memory ViewerSwitches the input to Memory Viewer.Displays the still image or movie recorded in the SD card using theMemory Viewer function.(xpage101)MIRRORINGSwitches the input to MIRRORING.Displays the image transmitted wirelessly from the Intel®WiDi /Intel®Pro WiDi / Miracast compatible terminal.APP>Panasonic APPLICATIONSwitches the input to Panasonic APPLICATION.Displays the image transferred from the computer (including iPad,iPhone, iPod touch, or Android devices) using the Panasonic imagetransfer application software.SignageSwitches the input to Signage.Plays back and displays the contents such as still image or moviefiles in the SD card according to the schedule or slideshow settingregistered with the Content Manager.For the use of the signage playback function, please refer to the"Operating Instructions – Content Manager Manual".It is also possible to use the signage playback function by settingschedule in the Content Management Software.NotefWhen an audio signal is included in each input, it is output from the fTo switch the input to anything other than the HDMI input, it may take seconds to complete the switching. [Please wait...] is displayed on theprojection screen when the switching takes time.fWhen the , , , or button is pressed during signage playback, the signageplayback is stopped and switches to respective input.fPressing the button while the signage playback is stopped will switch the input to signage, and the signage playback will startor resume.fRefer to “Operating Instructions – Content Manager Manual” for the signage playback.fThe image transfer application software “Wireless Manager ME6.3” compatible with Windows computers or Mac is contained in the suppliedCD-ROM. For the image transfer application software compatible with iPad/iPhone/iPod touch, and Android devices, refer to the followingURLhttp://panasonic.net/avc/projector/fThe “Content Management Software” compatible with Windows computers can set schedule used for signage playback. For details, refer tothe following URLhttp://panasonic.net/avc/projector/
