Panasonic PT-JX200HBU Operating Instrucctions

Contents

Chapter 3 Basic Operations — Turning on/off the projectorENGLISH - 51Turning off the projector1)1) 2)1) Press the power <v/b> button.f The [POWER OFF(STANDBY)] confirmation screen is displayed.2) Press qw on the remote control to select [OK], and press the button.(Or press the power <v/b> button again.)f The projection is finished.3) Wait for a few seconds until the power indicator lights in red.4) Turn off the power of the track system if necessary.Notef Even when the power is turned off by pressing the power <v/b> button, the projector consumes power if the power of the tracksystem is turned on.The power consumption during standby can be conserved when the [SETUP] menu → [ECO MANAGEMENT]→ [STANDBY MODE] is setto [ECO].f The projector can be turned off by turning off the power of the track system during the projection, but the settings and adjustmentsperformed right before turning off the power may not be reflected.f Do not turn off the power of the track system or eject the SD card while the SD card indicator is blinking. The projector may notoperate properly or the contents of the SD card may get damaged.f When the [SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NORMAL], the internal cooling fan may operate evenduring standby.