101Use the same SSID setting as the access point. Pleaseconsult your network administrator.If wireless communication has already beenestablished using an access pointIn this case, it is required to make settings so that wireless communication will beavailable between the personal computers and the projector in infrastructure modethrough the access point.Communication may not be established depending on the access point used.For details of setting the projector, refer to "Setting the projector" on page 104.LANRPersonal computer Personal computer Personal computerPersonal computer Access point ProjectorSetting of the projectorTypical settingParametersIP addressSubnet maskModeChannelSSIDFor details of setting, please consult your networkadministrator.INFRASTRUCTURENotes:• If the projector is used in the area where the radio waves cannot reach the accesspoint, follow the instructions described in "If wireless communication has alreadybeen established between PCs (in ad hoc mode)" on page 100.• For the SSID of the projector, up to 32 alphanumeric characters and symbols areavailable. For this reason, if the SSID of the access point cannot be used in theprojector, consult the network administrator and have the SSID changed to the onethat can be used in the projector.• The projector does not support DHCP. If your LAN uses DHCP server, a fixed IPaddress must be assigned to the projector. For details, please consult your networkadministrator.Use the same channel setting as the access point. Pleaseconsult your network administrator.
