95If this is the second or forward time of SD card insertion, no setting operation isrequired.rr Select "Create list of all driversexisting in specific location and selectthe driver for installation" and click the"Next" button.tt Select "Standard IDE/ESDI hard diskcontroller" and click the "Next" button.From now on, go on installation operation followingthe instructions on the screen. Finally, click the"Complete" button to finish the preparatoryoperation for SD card use.yy Open "My Computer" on the desktopand confirm that the icon of the newdrive has been created.Although the drive icon has the same picturepattern as that of thee hard disk, you can identify itwith the disk capacity (indication of "6.4 MB" for a8 MB SD card; the drive character of D:, E:, F:etc. is used depending on the model of thepersonal computer). If the capacity is not displayedas in the diagram on the right, select the drive iconand press the "ALT" + "ENTER" buttons and checkthe indication on the displayed "Properties"window.Notes:• The procedure window is for Windows 98SE. The contents of displayed windowvary with the Windows version. If the "New hardware" window requests selection ofthe driver, select "Windows standard driver" and click the "OK" button. For furtherinformation, refer to on-line Help of Windows.• Deletion, copy and renaming of a file, creation and deletion of a folder (directory)and similar operations can be performed in a similar manner to normal hard disk.Refer to the instruction manual and Help descriptions of your operating system(OS).• The projector supports DCF-conforming directories and files as well as folders andfiles specified by Wireless Manager 2.0. The projector cannot recognize directoriesand files that are not conforming to DCF (except when Wireless Manager 2.0 isused). Use Image Creator 1.0 to convert the format.For details of Image Creator 1.0, refer to "Image Creator 1.0" on page 130.For details of DCF standard, refer to "DCF standard" on page 136.Icon of SD card drive
