67 Others+ Press the ENTER button andselect the “LAMP RUN TIME” bypressing the F or G buttons., Press and hold the ENTERbutton for approximately 3seconds.The “Lamp Time Reset” will bedisplayed.- Select “OK” by pressing theII or HH buttons and press theENTER button.NOTE:B If “CANCEL” is selected in step-, the operation for resetting thelamp time will be cancelled.. Turn off the power.This will reset the cumulativeusage time for the lamp unit tozero.Refer to steps % and & on page31 for details on how to turn offthe power.' Close the air outlet port, andthen use a Phillips screwdriverto securely tighten the airoutlet port fixing screws.NOTE:B Be sure to install the lamp unitand the air outlet port securely. Ifthey are not securely installed, itmay cause the protection circuitto operate so that the powercannot be turned on.( Insert the power cord plug intothe wall outlet and then pressthe MAIN POWER switch.NOTE:B If the POWER indicator on theprojector does not illuminate redwhen the MAIN POWER switch isturned on, turn the MAIN POWERswitch off again and check thatthe lamp unit and the air outletport are securely installed. Thenturn the MAIN POWER switchback on.) Press the POWER button sothat a picture is projected ontothe screen.* Press the MENU button todisplay the MENU screen, andselect “OPTION” by pressingthe II or HH buttons.OPTIONSHUTTEROSDAUTO KEYSTONERGB/YPbPrRGB2 SELECTBACK COLORFRONT/REARDESK/CEILINGLAMP POWERLAMP RUN TIMENEXT PAGE @1820 HOFFOFFRGBINPUTBLUEFRONTDESKLOWONONYPbPrOUTPUTBLACKREARCEILINGHIGHSELECT:[{][}]ADJUST:[{][}]ENTER:[ENTER]ESC:[MENU]OPTIONSHUTTEROSDAUTO KEYSTONERGB/YPbPrRGB2 SELECTBACK COLORFRONT/REARDESK/CEILINGLAMP POWERLAMP RUN TIMENEXT PAGE @1820 HOFFOFFRGBINPUTBLUEFRONTDESKLOWONONYPbPrOUTPUTBLACKREARCEILINGHIGHSELECT:[^][@]ADJUST:[{][}]ENTER:[ENTER]ESC:[MENU]Power OFFOK CANCELLamp Time Reset
