Panasonic PT-LB90NTEA Operating Instructions Manual

Also see for PT-LB75VE: Brochure & specs Operating instructions

Contents

Panasonic PT-LB90NTEA Operating Instructions Manual Manual pdf 25 page image

Projecting an imageENGLISH - 25 Basic OperationProjecting an imageConfirm the connections of the peripheral devices (Æpage 19, 20) and mains lead (Æpage 21). Switch on thepower (Æpage 23) and the projector starts projecting. Select the input signal and adjust the image.Selecting the input signal1 ) Switch on the connected devices.When playing a connected DVD player, if SIGNALSEARCH in the DISPLAY OPTION menu is setto ON, the input signal is detected and projectedautomatically when the projector is switched on.(Æpage 39)Set thez INPUT GUIDE under the ON-SCREENDISPLAY in the DISPLAY OPTION menu toDETAILED. If the projector cannot detect anyinput signal, the Computer connection guidancewill display. (Æpage 38)2 ) Select an input signal.The image selected with the INPUT SELECTbutton is projected. (Æpage 26)NoteChange the setting of thez PICTURE menuaccording to the connected device and DVD, videotape, etc., to be played. (Æpage 33)Confirm the aspect ratio of the screen and image.zSelect the optimum aspect ratio. (Æpage 35)Positioning the imageWhen setting up the projector for the first time or setting up at a new place, you must perform the following operations.1 ) Adjust the vertical angle of the projector.Place the projector at the right angle from the screen.zPress the adjuster buttons and adjust the vertical projection angle. Then, adjust the projected image to thezcentre of the screen.2 ) Adjust the projection size and focus.Remove the Zoom-Focus ring coverz (Æpage 14) and turn the zoom and focus rings to adjust the projectedimage. After adjusting, be sure to install the Zoom-Focus ring cover to protect from dust.Zoom ring(ZOOM)Focus ring(FOCUS)RemarksWhen you adjust the zoom after adjusting the focus, you may need to adjust the focus of the image again.zIf keystone distortion occurs, see “KEYSTONE”.z (Æpage 34)