Panasonic PT-LB90NTEA Operating Instructions Manual

Also see for PT-LB75VE: Brochure & specs Operating instructions

Contents

Panasonic PT-LB90NTEA Operating Instructions Manual Manual pdf 28 page image

Remote control operation28 - ENGLISHBasic OperationEnlarging the imageYou can enlarge the projected image down to a centredarea for emphasizing within the range of 1× to 2×.Press button.Press the RETURN button to escape.J Button functions in digital zoommode+ button: zooms in- button: zooms outPress “- ” Press “+”Press ▲▼◄► to shift the centre point.RemarksWhen thez COMPUTER signal is projected, theenlargement range will be changed to 1× to 3×.When FRAME LOCK in the POSITION menu is setto ON, the enlargement range is 1× to 2×. However,the enlargement range is 1× to 3× if FRAME LOCKis set to OFF. (Æpage 36)When the input signal is changed while thezDIGITAL ZOOM is activated, the DIGITAL ZOOMmode will be cancelled.While thez DIGITAL ZOOM is activated, the AUTOSETUP, FREEZE, DEFAULT, INDEX-WINDOWand FUNCTION (except when AV MUTE isassigned) buttons are not available.Using an assigned functionYou can select a useful function from the list andassign it to the FUNCTION button for a short-cut.Press button.Press the MENU button of the control1 )panel or remote control to display theon screen menu (main menu, sub-menu or detailed menu) .For the menu operation, see “Navigating throughthe MENU”. (Æpage 29)Press and hold the FUNCTION button2 )of the control panel or remote controlfor 3 seconds or more.When not using the FUNCTION buttonQSelect DISABLE in this menu1 )(FUNCTION BUTTON in thePROJECTOR SETUP menu).Press the ENTER button.2 )Select OK.3 )Press the ENTER button.4 )RemarksFor details, see “FUNCTION BUTTON” in thez“PROJECTOR SETUP menu”. (Æpage 43)