Panasonic PT-LB90NTEA Operating Instructions Manual

Also see for PT-LB75VE: Brochure & specs Operating instructions

Contents

Panasonic PT-LB90NTEA Operating Instructions Manual Manual pdf 32 page image

PICTURE menu32 - ENGLISHSettingsPICTURE menuNavigating through the MENU (Æpage 29),select PICTURE from the main menu and thenselect the required item from the sub-menu.Set the selected item with ◄►buttons.zRemote control Control panelPICTURE MODEDepending on the projection environment, you canoptimize the image projection.Change setting Change settingPress◄►buttons to cycle through the options.STANDARD DYNAMICNATURAL WHITE BOARD BLACKBOARDSTANDARD Setting for general imageDYNAMIC Setting for brightness andsharpnessBLACKBOARD Setting for when projecting on ablackboardWHITE BOARD Setting for when projecting on awhite boardNATURAL Reproducing the original colour ofthe imageRemarksIt may take a while until the selected mode iszstabilised.CONTRASTYou can adjust the contrast of the projected image.Lower HigherBRIGHTNESSYou can adjust the brightness of the projected image.Darker BrighterCOLORYou can adjust the colour saturation of the projectedimage. (Available with signals of S-VIDEO/VIDEO/RGB (Moving image)/YPB PR only)Lighter DarkerTINTYou can adjust the skin tone in the projected image.(Available with signals of S-VIDEO/VIDEO/RGB(Moving image)/YP B PR only)More reddish More greenishSHARPNESSYou can adjust the sharpness of the projected image.Less sharp More sharpRemarksThe adjustable range depends on the input signal.zWHITE BALANCEYou can adjust the white balance more properly in 3colours temperature.(Available with signal of RGB (Still image) only)- 1 +1Press▲▼buttons to cycle through the options.Advanced menu item DefaultWHITE BALANCE RED 0WHITE BALANCE GREEN 0WHITE BALANCE BLUE 0COLOR TEMPERATUREYou can adjust the white balance of the projected image.Change setting Change settingDEFAULT HIGH LOWDEFAULT Balanced whiteHIGH More bluishLOW More reddish