Panasonic PT-LB90NTEA Operating Instructions Manual

Also see for PT-LB75VE: Brochure & specs Operating instructions

Contents

Panasonic PT-LB90NTEA Operating Instructions Manual Manual pdf 45 page image

SECURITY menuENGLISH - 45 SettingsSECURITY menuNavigating through the MENU (Æpage 29),select SECURITY from the main menu and thenselect the required item from the sub-menu.When you apply to thez SECURITY menu forthe first time, you will be asked to perform thepassword operation. Input the initial password bypressing ▲►▼◄▲►▼◄ buttons in order andthen press the ENTER button.Set the selected item with◄►buttons.zRemote control Control panelNotePerform the above operation after thez SECURITYmenu is displayed.If you have changed the password, input the newzpassword and press the ENTER button.PASSWORDYou can activate the security system and thepassword operation will be asked to perform whenprojecting mode started.Change setting Change settingOFF DeactiveON ActiveRemarksPASSWORDz is set to OFF by default and wheninitialised.Change your password regularly. Do not use azsimple password that is too easy to guess.Unless you perform the correct password operation,zall of the button controls will be disabled except thePOWER button.PASSWORD CHANGEYou can change the password operation to your original.Press▲▼◄►buttons to change the1 )password.(Up to eight button operations can be set.)Press the ENTER button.2 )Input the password again and press3 )the ENTER button.RemarksThe entered password operations will appear aszasterisks in the box.If a series of button operation is incorrect, you willzbe asked to perform again.TEXT DISPLAYYou can set your original text to display regularly atthe bottom of the projected image while projecting.Change setting Change settingOFF DeactiveON ActiveTEXT CHANGEYou can enter your original text to be displayed whenTEXT DISPLAY is turned ON.Press▲▼◄►buttons to select the required1 )character and press the ENTER button.(You can input up to 22 characters.)To delete all the entered characters, move thecursor to ALL DELETE and press the ENTERbutton. To delete a character, press the DEFAULTbutton or move the cursor to the requiredcharacter then press the DEFAULT button.ALL DELETEOK CANCELTEXT CHANGESPACEPress▲▼◄►buttons to select OK and2 )press the ENTER button.Select CANCEL or press the MENU/RETURNbutton to return to the previous menu withoutsetting.