Panasonic PT-LX22EA Operating Instructions Manual
                                                                         | |
Contents
| 
36 - ENGLISHSettingsInput menuSelect [Input] from the Main Menu (see“Navigating through the menu” on page 33),then select the item from the sub-menu.Remote Control Control PanelComputer 1: RGB/Component/RGB (Scart) /S-videoPress ▲▼ to select [Computer 1].1 )Press ► to access the submenu.2 )Press ▲▼ to select [RGB],3 )[Component] , [RGB(Scart)] or[S-video].Press the 4 ) When Computer is selected, Component,z[RGB(Scart)] or [S-video] can be available.J Computer System SelectionThis projector automatically tunes to various typesof computers with its Multi-scan system and AutoPC Adjustment. If a computer is selected as a signalsource, this projector automatically detects the signalformat and tunes to project a proper image withoutany additional settings. (Signal formats provided inthis projector are shown on pages 66-68.)When the projector can not recognize theconnected signal conforming to theprovided PC Systems, Auto is displayedon the System Menu box and the [Auto PCadjustment] function works to display properimages. If the image is not projectedproperly, a manual adjustment is required.There is no signal input from the computer.Check the connection between yourcomputer and the projector.The preset system is manually adjusted inthe PC adjust Menu. The adjusted data canbe stored in Mode 1-10.PC Systems provided in this projectoris chosen. The projector chooses a propersystem provided in the projector anddisplays it.* Mode 1 and SVGA 1 are examples.Press ▲▼ to select [System].1 )Press ► or the 2 )access the submenu.Press ▲▼ to select the desired system.3 )VideoPress ▲▼ to select [Video] and thenpress the J Video System SelectionVideo or S-videoAutoThe projector automatically detects an incoming videosystem, and adjusts itself to optimize its performance.When [Video System] is [PAL-M] or [PAL-N], selectthe system manually.PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-NIf the projector cannot reproduce proper video image,select a specific broadcast signal format from among[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and[PAL-N].ComponentAutoThe projector automatically detects an incoming videosignal, and adjusts itself to optimize its performance.COMPONENT VIDEO SIGNAL FORMATIf the projector cannot reproduce proper video image,select a specific component video signal formatamong [480i], [576i], [480p], [576p], [720p], [1035i]and [1080i].AUTO- - - -Mode 1SVGA 1 |
Related manuals for Panasonic PT-LX22EA
Panasonic PT-LX26HU Operating Instructions Manual
Panasonic PT-LX26HE Operating Instructions Manual
Panasonic PT-L5 Operating Instructions Manual
Panasonic PT-LX300EA Operating Instructions Manual
Panasonic PT-LB3EA Operating Instructions Manual
Panasonic PT-LB1 Operating Instructions Manual
Panasonic PT-MU Operating Instructions Manual
Panasonic PT-LX300U Operating Instructions Manual
Panasonic PT-LX30HU Operating Instructions Manual
Panasonic PT-LX300E Operating Instructions Manual
manualsdatabase
Your AI-powered manual search engine